AC Evap Line o-ring missing?
#1
Teching In
Thread Starter
Join Date: Jun 2009
Location: Arlington, Tx
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
AC Evap Line o-ring missing?
I’m replacing the compressor on a 99 TA and when I removed the evap line to change the orifice I noticed the male end that mates into the condenser didn’t have any packing or O ring on it at all. The book says to replace the o ring but I’m not sure if it means the one going into the orifice side of the line or the condenser side. Any help is much appreciated it. Thanks.