car idles high
01-18-2006, 12:07 PM
#1
Staging Lane
Thread Starter
Join Date: May 2005
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
car idles high yesterday i went to start my car and nothing, not even a click. i jump it and it started right up but the idle was around 2200 and wouldnt drop below unless i would put it into gear and begin to engage the clutch. the car did seem to run fine while driving except when i would shift it would have a slight rise in rpms (w/o pressing the gas). i did check my tb and the cable and everything looked to be fine. plz help if you have any idea
01-18-2006, 12:28 PM
#2
LS1Tech Administrator
iTrader: (3)
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,273
Likes: 0
Received 1,706 Likes
on
1,223 Posts
Usually there is a relearn period after power to the PCM is disrupted. But the idle should return to normal after some driving and a restart or two. There is also an OBD idle re-learn proceedure you can do to speed the process, but it should relearn on it's own with some driving and re-starts.
Is it still doing it? Are you getting any SES light? Done any recent mods or replaced any parts lately?
Is it still doing it? Are you getting any SES light? Done any recent mods or replaced any parts lately?
01-18-2006, 05:01 PM
#4
LS1Tech Administrator
iTrader: (3)
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,273
Likes: 0
Received 1,706 Likes
on
1,223 Posts
Originally Posted by sprayinss
u may wana start looking for and vacuum leak that will cause it to idle high and eratic too
Yep. That's happened to me before.
01-18-2006, 08:51 PM
#6
LS1Tech Administrator
iTrader: (3)
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,273
Likes: 0
Received 1,706 Likes
on
1,223 Posts
Originally Posted by RedLS1Iroc
thx for the help it was a vacuum leak, i fixd it and its running fine again. just so happened that the battery went bad at the same time. thx again for the help
Glad you got it figured out.
