General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

tensioner pulley squeking

Thread Tools
 
Search this Thread
 
Old 06-30-2006, 08:33 PM
  #1  
Launching!
Thread Starter
iTrader: (1)
 
99 Predator's Avatar
 
Join Date: Dec 2005
Location: Marlboro, NJ
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
Default tensioner pulley squeking

has anyone ever had a problem with there tensioner pulley squeaking? i replaced my idler pulley not too long ago so im pretty sure its not that and it sounds like it coming from the right side.
Old 06-30-2006, 08:54 PM
  #2  
11 Second Club
iTrader: (8)
 
TA TECH's Avatar
 
Join Date: Aug 2004
Location: Under a hood in Alabama
Posts: 503
Likes: 0
Received 1 Like on 1 Post
Default

Yeah tensioners on these cars go out pretty regularly with miles or as time goes by!Sounds kinda like the belt chirping!
Old 06-30-2006, 09:05 PM
  #3  
On The Tree
 
bray's Avatar
 
Join Date: May 2005
Location: va 4 now
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah, when mine went, it took me a while to figure out exactly what it was. my surp. belt tensioner made very little noise, but the a/c belt one, at idle it sounded kinda like a belt slippin, about 30-40 mph at low rpm it was like a loud squaking. i read on here, i think, that they are only rated for 50k miles. i changed mine at a little over 90k. no more noise
Old 07-01-2006, 01:35 AM
  #4  
TECH Veteran
iTrader: (19)
 
2002_Z28_Six_Speed's Avatar
 
Join Date: Aug 2005
Location: Wash, DC
Posts: 4,539
Likes: 0
Received 1 Like on 1 Post

Default

Yea, I had noise in my 2002. Cost me about 100 dollars from the dealer too.
Old 07-02-2006, 12:45 AM
  #5  
Staging Lane
iTrader: (1)
 
RedZ99's Avatar
 
Join Date: Jan 2006
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Default

loosen the belt and spin the pulley, and check the bearing play. these bearings have plastic seals that blow and let the grease out. the air cond. pulleys are actually overmolded plastic around the bearings. if the pulley squeaks and the bearing feels loose, i'll bet a cyber-beer that there's grease on the back of the pulley!




All times are GMT -5. The time now is 11:42 PM.