Window Motor
Window Motor Not sure where else to post this but anyway I replaced my window motor this morning as so many people have to do, and found it was held in place but bolts rather than rivets as most people seem to say. It was never replaced before so it must have come from the factory like that. Just a little FYI.
Bryan
parbreak
Bryan
parbreak
Originally Posted by parbreak
Not sure where else to post this but anyway I replaced my window motor this morning as so many people have to do, and found it was held in place but bolts rather than rivets as most people seem to say. It was never replaced before so it must have come from the factory like that. Just a little FYI.
Bryan
parbreak
Bryan
parbreak
Originally Posted by BrandonDrecksage
from the factory ...all of them come with rivets...just a fyi.
Well, can you explain why mine had bolts and nuts and NO and I mean NO access holes drilled whatsoever? Guess GM ran out of rivets that day
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Senior Member
Joined: Apr 2002
Posts: 6,080
Likes: 17
From: So.Cal.
I searched the forum, but I can't find any procedures/pics for replacing the window motor... I'm going to follow the GM service manual, but a few pics would help; anyone point me in the right direction, please...?
Edit: I suppose this is "external engine"...
Edit: I suppose this is "external engine"...
TECH Resident
Joined: Jan 2006
Posts: 991
Likes: 0
From: harrisburg, pa
mines a 2000.. 28k when mine went.. so far ive driven 2k, every now and then i forget and go to put it down.. it goes half way then takes 3 hours to get back up.. the passenger sides going to take a **** my summer.. how much do these things cost?
Originally Posted by joecar
I searched the forum, but I can't find any procedures/pics for replacing the window motor... I'm going to follow the GM service manual, but a few pics would help; anyone point me in the right direction, please...?
Edit: I suppose this is "external engine"...
Edit: I suppose this is "external engine"...
Originally Posted by 98redM6
Are you the original owner?
Yes, I am the original owner and don't ever remember replacing the window motor before. Of course I do walk in my sleep but I don't think I work in my sleep!! Only place I saw rivets was on the regulator but not on the motor itself.
TECH Senior Member
Joined: Apr 2002
Posts: 6,080
Likes: 17
From: So.Cal.
