Stripped threads= drilling/tapping?
Thread Starter
TECH Addict
iTrader: (35)
Joined: Dec 2005
Posts: 2,373
Likes: 0
From: Cherry Hill, NJ
Stripped threads= drilling/tapping? On my trans. crossmember, one of the bolts(1 out of 4) got stripped but more so the actual threads of the hole. I guess I will need to drill and tap. Have never done this before so please give me some tips. I guess if I rethread the hole, it will be slightly larger in diameter and will therefore need a bigger diameter bolt? Thanks.
Originally Posted by 98camaroLS1M6
What do mean by this?
