Need some help
02-11-2007, 06:24 PM
#1
Staging Lane
Thread Starter
Join Date: May 2006
Location: Lafayette, LA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Need some help OK guys just installed my Pacesetter LT with TSP Rumbler Exhaust yesterday. Just came from the track and about 4500rpm the exhaust is popping like crazy. I am losing alot of power was hoping for my 12 sec. run today but it was popping all the way down the track. Any body can help with this.
Took the EGR out
2000 WS6 Ram Air TA
Took the EGR out
2000 WS6 Ram Air TA
02-11-2007, 10:32 PM
#3
Staging Lane
Thread Starter
Join Date: May 2006
Location: Lafayette, LA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
The header gaskets are some copper gaskets and the exhaust has the braces not welded. When I say popping its really backfiring like crazy. Dont know if it is a vaccum line or what.
02-12-2007, 09:34 AM
#5
Staging Lane
Thread Starter
Join Date: May 2006
Location: Lafayette, LA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man I will look in to that. But its something the car pulls strong untell it hits 4500rpm than it starts backfiring. But if you think of any thing else just let me know.
02-12-2007, 10:07 AM
#6
TECH Enthusiast
iTrader: (25)
Join Date: May 2006
Location: Hinesville, GA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Same problem here, thought it was in need of tune from cam, but mine does it all rpm's at WOT, and some at just half throttle as well, almost like it's supposed to do it, repetitive? Same issues, it kills power, adn you'r eprobably running lean too, so be careful. Anyone know what our deal is? i PUT NEW PLUGS AND WIRES ALREADY