O rings on PS rack?
Thread Starter
TECH Enthusiast
iTrader: (27)
Joined: Aug 2005
Posts: 741
Likes: 0
From: Anheuser Busch, Houston Texas
O rings on PS rack? I cannot remember, since I always just undo the fittings at the rack and stick them into the new rack.
Are there o rings on the PS hose ends at the rack?
I think I ended up with a leak, but I do not think it is supposed to have o rings on the pressure and/or return hoses.
Anybody take one of these off lately and remember?
Are there o rings on the PS hose ends at the rack?
I think I ended up with a leak, but I do not think it is supposed to have o rings on the pressure and/or return hoses.
Anybody take one of these off lately and remember?
Thread Starter
TECH Enthusiast
iTrader: (27)
Joined: Aug 2005
Posts: 741
Likes: 0
From: Anheuser Busch, Houston Texas
I did a little looking at parts catalogs and manuals an apparently there are. Just for future reference. O rings are somewhere in the 7-9mm range it looks like.
Last edited by lo_jack; Mar 29, 2007 at 12:36 PM.
Thread Starter
TECH Enthusiast
iTrader: (27)
Joined: Aug 2005
Posts: 741
Likes: 0
From: Anheuser Busch, Houston Texas
Just in case anyone has this problem ever again; there is an o ring on the pressure and return lines right at the end. 7mm did the trick. It leaked mildly without them.
