rear end problems...
rear end problems... ok i just installed a 99 rearend in my 00 that has 373 in it and we had to switch the harnesses for the wheel sensors to the single one insted of the 2 sensors that are on the old one well we got everything hooked up and started the car and the abs light, traction controll light and brake light all came on is the harness not reading right or do i need it to be retuned for the different wheel sensors anyone have any idea just let me know thanks
You need to add the reluctor rings at the end of the axles for the wheel ABS sensors, and use your old brake backing plates to allow the use of the sensors at the axle ends.
Yup, means you have to pull the axles and press the reluctor rings on, or use your old axles and backing plates on the new rear.
You do need to tune for the gears.
Yup, means you have to pull the axles and press the reluctor rings on, or use your old axles and backing plates on the new rear.
You do need to tune for the gears.
we did use reluctor rings and used the old brake backing plates and i know i need it turned to get the right mph but i didnt think i had to turn it for the new wheel sensor
