Help with 89 trans am directionals.
Thread Starter
Teching In
Joined: May 2007
Posts: 36
Likes: 0
From: Monroe Township, NJ
Help with 89 trans am directionals. well im tryin to fix my brother's 1989 trans am and the directionals havents worked in years.. the fuse always blows and i even changed the lever to activate them. is there any type of wiring harness i could replace or any other reason why this might be happening? i need to get this thing on the road because its just sittin in the driveway... it has an amazing paint job on it and its sad to see it sit... it has kamelion paint(color changing) im new to this forum and will be an active member... thanks for your help if i get any.
my first guess would be to look at any aftermarket wiring (stereo type stuff, strobes, etc.), make sure that you didn't tap into any of the turn signal wires.
think of it this way, there is something in the wiring that wasn't there from the factory that i making it pull more current than it is designed to. it might be something like an exposed wire touching something that it shouldn't.
chasing wiring problems are sometimes a serious pain in the butt... good luck!
think of it this way, there is something in the wiring that wasn't there from the factory that i making it pull more current than it is designed to. it might be something like an exposed wire touching something that it shouldn't.
chasing wiring problems are sometimes a serious pain in the butt... good luck!
