A/C doesn't work after header/ORY install
#1
12 Second Club
Thread Starter
Join Date: Jul 2006
Location: NW Ohio
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
A/C doesn't work after header/ORY install
Well about 2 months after I had headers, ORY, cut out and stall put in the car my A/C doesn't work anymore. It used to work perfect before but now nothing. I don't know if anything is related but I find it weird to stop working out of no where.
If anyone might know what the problem is, any help would be appreciated. I would hate to have to go to a dealer and pay big $$$ to fix something that I could fix.
Thanks
If anyone might know what the problem is, any help would be appreciated. I would hate to have to go to a dealer and pay big $$$ to fix something that I could fix.
Thanks
#2
TECH Senior Member
If it worked fine for 2 months after all the work was done it's nothing the shop did, something else is going on. Could be a leak, electrical problem, etc. I'd bring it to a local shop that does AC and have them look at it before going to a dealer.
#5
12 Second Club
Thread Starter
Join Date: Jul 2006
Location: NW Ohio
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
It does not seem to be engaging the compressor.
I would think if anything melted it would have been sooner than 2 months of driving, but I guess you never know.
I'll check all of the connectors and fuses and see if something is loose.
Thanks for all of the possibilities.
I would think if anything melted it would have been sooner than 2 months of driving, but I guess you never know.
I'll check all of the connectors and fuses and see if something is loose.
Thanks for all of the possibilities.