Will this be OK
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Nov 2005
Posts: 1,889
Likes: 0
From: Alexandria, LA
Will this be OK PCV system!!
Im getting a LS6 valley cover and plugs. but i was thinking instead of using the vent line on the pass. valve cover, just cap it too. and only pulling from the valley, with no breathers. Im thinking this would help to get a vacumn on the crankcase.
tell me what i should do
Im getting a LS6 valley cover and plugs. but i was thinking instead of using the vent line on the pass. valve cover, just cap it too. and only pulling from the valley, with no breathers. Im thinking this would help to get a vacumn on the crankcase.
tell me what i should do
Read the entire thread and you will see why you need filtered air going in to at least one of your valve covers.
https://ls1tech.com/forums/generation-iii-external-engine/908641-clearing-up-misconceptions-pcv-systems.html
https://ls1tech.com/forums/generation-iii-external-engine/908641-clearing-up-misconceptions-pcv-systems.html
