Adding new mods next month
Adding new mods next month I am going to be putting some pacesetter lts, the pacesetter ory, a hooker max flow muffler and have a custom 3" cb built. I am also going to add some msd wires and some ngk plugs and get the car tuned by boost performance. Oh yeah, I am also getting a smooth bellow and getting some mt e/t streets. These are the last mods I am going to get to add for a while, seeing as how my girl is ready to get a house and start a family and such, so I am just wondering what I could expect to gain from these mods and if they are going to be able to keep me satisfied for a while. This car is already bad *** in my eyes and I am hoping that these will be enough, at least for now. The price for all of this is around 1200 dollars so I am just wanting to make sure its worth it.
Sounds good... Save your money and pass on the bellows. use it for a "ram air" http://fasttoys.net/shop/index.php?cPath=84_24_27_42
Last edited by conan; Oct 25, 2008 at 09:02 PM. Reason: add link
I am going to be putting some pacesetter lts, the pacesetter ory, a hooker max flow muffler and have a custom 3" cb built. I am also going to add some msd wires and some ngk plugs and get the car tuned by boost performance. Oh yeah, I am also getting a smooth bellow and getting some mt e/t streets. These are the last mods I am going to get to add for a while, seeing as how my girl is ready to get a house and start a family and such, so I am just wondering what I could expect to gain from these mods and if they are going to be able to keep me satisfied for a while. This car is already bad *** in my eyes and I am hoping that these will be enough, at least for now. The price for all of this is around 1200 dollars so I am just wanting to make sure its worth it.
What is a fernco mod? I am wanting to do the smooth bellows cuz my stock pipe has creases and bends in it and I know that the smooth bellow is going to flow better even if not that much hp gain.
its about 4 dollars compared to SLPs 60 dollars.. does the same thing...
but again.. its a waste of time/money.. there are people with 4..5...600rwhp running the stock bellows.. all of ours has the creases and bends in it.. save your money.. it could be used elsewhere.. put it towards gears.. the difference between gears and a bellow......... hmmmmmm, you would **** your pants over the difference..
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo man, if you want best bang for your buck... id do...
longtubes and a ypipe.. keep the same exhaust you have, but put a cut out on it... 373s... and a tune.. you will be more than happy!
longtubes and a ypipe.. keep the same exhaust you have, but put a cut out on it... 373s... and a tune.. you will be more than happy!
I already have a cutout, I just want something that sounds different, and the hooker doesn't rasp. I think I'm gonna keep the same gears though, kinda like my gas mileage the way it is.
1. more stop and go, under 50 mph...
2. straight shots, above 50 mph..
More stop and go driving. It's my daily driver. We do like to go places out of town alot though, so if the 3.73 isn't really going to hurt my day to day, I would do that no doubt. Could you tell me where to get some, if that's the case.
i bought mine used..... but they constantly have them in the F/S section.. you can get new or used... people sell ones that are still brand new in the box for 20-30 bucks cheaper than a store...
if you have stock 3.23 gears, you need series 3 carrier..
if you have stock 2.73 gears, you need series 2 carrier..
thats what id do..
Yep!
https://ls1tech.com/forums/lsx-parts-sale-45/
check this too.. your in Tx. so......
https://ls1tech.com/forums/texas-classifieds-141/
https://ls1tech.com/forums/lsx-parts-sale-45/
check this too.. your in Tx. so......
https://ls1tech.com/forums/texas-classifieds-141/