X-Pipe
Trending Topics
Re: X-Pipe Dr. Gas kit.. can't beat it.. drgas.com
You can get the kit for about 210 shipped, mufflers for about 100... thats $310.. then labor can be $100-$150.. or you can do much if yourself and have an x-pipe kit for under $400 installed.
You can get the kit for about 210 shipped, mufflers for about 100... thats $310.. then labor can be $100-$150.. or you can do much if yourself and have an x-pipe kit for under $400 installed.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
On The Tree
Joined: Mar 2003
Posts: 119
Likes: 0
From: Austin, Texas
Re: X-Pipe I used a Stainless Works when I fabricated my 3" exhaust and it works great! Forgive my welds, this is the first time I used a MIG for 304 SS.
Exhaust from rear
Exhaust from rear
Re: X-Pipe SSh, that looks great to me! Nice picture, and the welds look at least as good as the ones I do! So is that tubing from a Stainlless Works kit? Where do I get some tubes like those? Also, did you put stainless wire in your MIG, or just use the normal stuff?
TECH Regular
Joined: Apr 2003
Posts: 446
Likes: 0
From: Lexington, KY
Re: X-Pipe
I used a Stainless Works when I fabricated my 3" exhaust and it works great! Forgive my welds, this is the first time I used a MIG for 304 SS.
Exhaust from rear
Exhaust from rear
Re: X-Pipe He got the piping from Stainless Steel Works as individual parts (not a kit) for about $500 and welded it all up himself. Also, this if not and Fbody and has more room underneath than your Z28.
