painted my intake
painted my intake well in the middle of my ls6 intake/pp tb swap i decided to polish the outside of the tb and paint up my intake..
i used a dremel and mothers on the tb and the intake i stripped down, sanded, sandblasted, primed, yada yada, then laid down a silver base coat and overtop i sprayed a silver crazer from alsa corp and used a red scotch brite to brush it to give it a stainless steel look...what do ya think? thanks!
i used a dremel and mothers on the tb and the intake i stripped down, sanded, sandblasted, primed, yada yada, then laid down a silver base coat and overtop i sprayed a silver crazer from alsa corp and used a red scotch brite to brush it to give it a stainless steel look...what do ya think? thanks!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
On The Tree
Joined: Jan 2009
Posts: 121
Likes: 0
From: Jonesboro, AR
PM me with what you would charge to tint the 4 tail lights out of a C5 corvette, along with the 2 rear side marker lights, and the rear backup lights, there are 2 of them. One on each side of the license plate.