Dumped BORLA
I took the tips off of mine and capped it at the flange with a cutout at the I. It tucks up decently on the driver side and nobody has told me it looks goofy. lol If I have time ill snap a pic from the back and under.
I have done it, im not a fan of tips on camaros
http://media.putfile.com/Z-exhaust
check the vid, lil shot of it and the sound.
http://media.putfile.com/Z-exhaust
check the vid, lil shot of it and the sound.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
the adjustable catback dumped????
you mean take the tips off? so you basically have a turndown on the driver sid of the muffler, and a small turndown behind the cutout?
interesting. it would look like any other camaro without tips.
there are some pics on my cardomain site in the sig..page 2
you mean take the tips off? so you basically have a turndown on the driver sid of the muffler, and a small turndown behind the cutout?
interesting. it would look like any other camaro without tips.
there are some pics on my cardomain site in the sig..page 2
Yep. I run with mine capped so I capped it at the passenger side flange(where adj plates go). The driver side I have with the tips pulled off(Its probably 2+ feet long) with no turndown. When I want some noise I have the E cutout at the I.
