LS6 Intake parts?
Thread Starter
TECH Junkie
iTrader: (12)
Joined: May 2002
Posts: 3,420
Likes: 0
From: Burleson/Ftw,Texas
LS6 Intake parts? I have a LS6 intake im going to put on when I get my cam, I ordered a EGR adapter and the cooling lines that go underneath the throttle body, do I need any other parts to make the install easy when I take it to the shop. I wanna make sure I dont leave anything out. 
Re: LS6 Intake parts? you should consider doing the ls6 pcv conversion at the same time...its easy...only took me about 30 more minutes...and now no oil consumption at all 
figure on around another $175 for that stuuff...parts....
its the valley cover...and and specially shaped egr tube and pcv valve....
plus might as well do the knock sensors while you're under there...I have to get in and replace one of mine...so I'm doing both.
figure on around another $175 for that stuuff...parts....
its the valley cover...and and specially shaped egr tube and pcv valve....
plus might as well do the knock sensors while you're under there...I have to get in and replace one of mine...so I'm doing both.
Re: LS6 Intake parts? ... "when I take it to the shop"
Why not save yourself some cash and do it yourself?
Why not save yourself some cash and do it yourself?
http://ls1howto.com/index.php?article=5
Thread Starter
TECH Junkie
iTrader: (12)
Joined: May 2002
Posts: 3,420
Likes: 0
From: Burleson/Ftw,Texas
Re: LS6 Intake parts? cause their doing a cam install too, and I dont have the spring tools nor the patience anymore, i can build a motor but its gotta be out of the car for me to do it. So im just gonna let the experts install my cam and intake since there gonna have most of the top apart. But I am planning on building a 382LS1 once I see what the new vettes have, Im gonna wait to see if there gonna be built with a all aluminum 6.0L like the rumors I have heard.
