Rev Extreme catch can pic needed.

Reply Subscribe

Thread Tools

Search this Thread

Mar 4, 2009 | 08:24 PM

redtail2426

Thread Starter

TECH Fanatic

iTrader: (10)

Joined: Aug 2004

Posts: 1,433

Likes: 0

From: Rochester,Ny

Rev Extreme catch can pic needed.

Anyone have a pic of this catch can installed on there car.I would like to see how it looks thanks.

Mar 4, 2009 | 08:47 PM

HavATampa

TECH Addict

iTrader: (49)

Joined: Aug 2003

Posts: 2,128

Likes: 1

From: Louisiana

I have one, but in the middle of a cam swap and it's not mounted right now. Here's a pic from their website. Very nice can but the aluminum bracket that it comes with is flimsy. With a big cam and the built in pcv valve in the can, it rattles pretty good when idling.

Mar 5, 2009 | 07:05 AM

redtail2426

Thread Starter

TECH Fanatic

iTrader: (10)

Joined: Aug 2004

Posts: 1,433

Likes: 0

From: Rochester,Ny

hey thanks i think i am going to mount that oil drum somehwere out of sight,its just to big.

Mar 5, 2009 | 07:40 AM

teke184

TECH Junkie

iTrader: (5)

Joined: Feb 2007

Posts: 3,183

Likes: 3

From: Key West, Florida

is the rattling due to the bracket or the pcv valve?

if you mounted it on the frame/body...would it rattle so much?

Mar 5, 2009 | 07:11 PM

HavATampa

TECH Addict

iTrader: (49)

Joined: Aug 2003

Posts: 2,128

Likes: 1

From: Louisiana

The rattling is the pcv in the can, which is normal. Just wish the bracket was thicker. Might look for a way to beef it up or make a new one. It's not a deal breaker by any means though. You can't hear the rattling unless you are under the hood and mounting it to the body or frame would help I'm sure.

Mar 5, 2009 | 10:35 PM

fatdave

12 Second Club

iTrader: (6)

Joined: Jul 2006

Posts: 419

Likes: 0

Mine is mounted on the head like in the pic. When I relocate my TCS behind the PCM I am going to make new lines and a bracket for it and mount it where that was