headers

Reply Subscribe

Thread Tools

Search this Thread

Jun 15, 2009 | 03:18 PM

formula38988

Thread Starter

On The Tree

Joined: Apr 2007

Posts: 175

Likes: 0

From: Omaha,NE

headers

ok so we were looking at putting my brothers exhaust on and we were looking at the headers and they didnt have holes drilled for the o2 extansions, are we going to have the have the headers taken in somewhere and have the holes drilled?
its an 04 GTO with pascetter headers and slp LM1 catback with midpipes (the midpipes the o2 holes)

Jun 15, 2009 | 05:05 PM

conan

TECH Senior Member

iTrader: (5)

Joined: May 2004

Posts: 6,492

Likes: 6

From: Back in the Burg

So there is no bung welded in to the collector for the front o2's?

Jun 15, 2009 | 05:08 PM

formula38988

Thread Starter

On The Tree

Joined: Apr 2007

Posts: 175

Likes: 0

From: Omaha,NE

Quote:

Originally Posted by conan

So there is no bung welded in to the collector for the front o2's?

right

Jun 15, 2009 | 05:43 PM

conan

TECH Senior Member

iTrader: (5)

Joined: May 2004

Posts: 6,492

Likes: 6

From: Back in the Burg

Ya your going to have to drill a hole and weld them in. Unless the gto's are differant from the F bodys.

Jun 15, 2009 | 05:47 PM

formula38988

Thread Starter

On The Tree

Joined: Apr 2007

Posts: 175

Likes: 0

From: Omaha,NE

Quote:

Originally Posted by conan

Ya your going to have to drill a hole and weld them in. Unless the gto's are differant from the F bodys.

well we were also thinking about only hooking up the front 02 extansions and leaving the back two unhooked like most of the f bodys out there and just dealing with the check engine light untill we can get it tuned out