Some q's about pacesetters before I install.
Some q's about pacesetters before I install. How do they slide up into each side? Are they a bitch or do they need a lil love or do they just slide in?
I may have to tap a hole in my head cuz i think it's f*d from when i did my heads/cam, anyone have ANY tips on what tap to use? I know the size is M8x1.25
The o2's, how do I get them off? wrench? what size?
thanks
do i need locktite? what kind?
-Steve
I may have to tap a hole in my head cuz i think it's f*d from when i did my heads/cam, anyone have ANY tips on what tap to use? I know the size is M8x1.25
The o2's, how do I get them off? wrench? what size?
thanks
do i need locktite? what kind?
-Steve
On The Tree
Joined: Nov 2002
Posts: 112
Likes: 0
From: Springfield
On the passenger side, you will need to remove the Starter and on the divers side there is a little block you will need to grind down about half inch. You will see it once you get there. Its pretty much there to **** you and and to get in your way. On the bolts use a medium stength lock tight. I dont remmeber what size on the O2s for the wrench but yes its a wrench. Unplug them before you try to uncrew them. Hope that helps a little bit. Yes after removing those they do slide up in there with a drop of love. I give the install a 8/10
Scott
Scott
Launching!
Joined: Oct 2002
Posts: 286
Likes: 0
From: OHIO
bigblackz is right on the money, I moved my wheel and ended up trying to put that bolt back in backwards 
Felt pretty dumb. Bolts are a sob to get in with the air, and egr still on. Would not do that again. Still trying to get to the first 3 plugs on the pass. side?
Felt pretty dumb. Bolts are a sob to get in with the air, and egr still on. Would not do that again. Still trying to get to the first 3 plugs on the pass. side? 
They slid from over the engine bay or under?
How high i have lift the car from the floor?Thanks
98 Red SS M6
4.10 gears,Ls6 intake,k&n filter,aluminum flywheel spect 3 clutch and in two weeks from now Pacesettes LT and ehaust sist.
How high i have lift the car from the floor?Thanks
98 Red SS M6
4.10 gears,Ls6 intake,k&n filter,aluminum flywheel spect 3 clutch and in two weeks from now Pacesettes LT and ehaust sist.
