What mufflers with a true dual system?
Currently running Pacesetter LT's, 3" ORP's to a Dr.GAS X pipe to 18" Dynomax bullets dumped at the axle under an agressive(ish) H/C car. If you're looking for that pissed off mountain motor LS1 sound....this IS it....trust me. Nasty idle....NO drone...NO rasp...SNOTTY LOUD WOT..... best sounding system I've EVER heard. Gets lots of compliments/attention.
Downside..... is loud....no sneaking around....'03 cobra's think twice....
Downside..... is loud....no sneaking around....'03 cobra's think twice....
Originally Posted by 1CAMWNDR
That is it....the EXACT exhaust system I hope to have, including the Pacesetter headers!
Do you have a sound clip of that??
I see that I need to check out the other stuff that Husker has
.
Do you have a sound clip of that??
I see that I need to check out the other stuff that Husker has
.Laters Steve-0
Originally Posted by WS6FirebirdTA00
did you email me yet or no? budchevy358@yahoo.com
I did last night, but I guess Yahoo is like Hotmail and wont accept large files so it bounced back. Ill send them seperate and see if it works
TECH Junkie
iTrader: (7)
Joined: Nov 2001
Posts: 3,378
Likes: 1
From: From the Bowels of Hell!!! You want some of me bitch?!?!?!
Why put Flowdisasters on an f-body? They sound and flow like crap. Thunder has done back to back testing and lost a bunch of hp through them. I don't have sound clips of mine but everyperson that has heard it says it doesn't even sound like an LS1. It sounds old school SBC. Plus, you don't need the x or h pipe. You can see in the pic I posted above that it is a very simple design, and flows very well. All mandrel bent, tig welded.
Originally Posted by Tim98TA
Why put Flowdisasters on an f-body? They sound and flow like crap. Thunder has done back to back testing and lost a bunch of hp through them. I don't have sound clips of mine but everyperson that has heard it says it doesn't even sound like an LS1. It sounds old school SBC. Plus, you don't need the x or h pipe. You can see in the pic I posted above that it is a very simple design, and flows very well. All mandrel bent, tig welded.
Trust me, mine doesnt sound like a LS1 and I have more compliments that I can count. I get waved down in traffic, stopped on the streets, and have seen people hold their cell phones out the windows of their car for someone to listen 
Maybe the 2 or 3 chambers flow like crap, but there are the delta FORCE (not flow) race mufflers. GeorgeC went 9s with this same muffler
Mine is also simple.http://community.webshots.com/user/countryboy4948
They tuck up a little better as I have the Kooks headers now and that was with the SLPs
BTW~ Find me that link of where Thunder flowd them. Im curious
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I couldn't agree more with Country Boy!!! I did my setup exactly like the pic's he sent me, and it is by far the best sounding exhaust I have ever heard. I've gotten more compliments than I could count, and I've never met anyone who didn't like it.. 
Last edited by Patrolman808; Nov 22, 2003 at 11:58 AM.
Originally Posted by Tim98TA
Well, ya'll do what ever. Flowdisasters are for Mudstains.
Night and Day difference!
people that need to host sound clips can go to http://ourworld.cs.com/, click edit. enter your AIM log in info. if you dont have aim then you can sign up for it. you get 20mb free storage.
TECH Enthusiast
Joined: Jun 2003
Posts: 720
Likes: 0
From: So Cal
Just heard Country Boy's set up. Im very biased about flowmasters, because ive seen time and time agian where people lose horspower with them.
However, his set up is by far the best sounding exaust set up I have ever heard on an LS1. I would be interested in seeing some flow numbers on those single chamber flowmasters, as well as a comparison on a complete X-pipe set up between the flowmasters and a typical borla or dynomax bullit set up.
Anyway, Congrats once again on your set up CB. It sounds deep and wicked.
LATER
However, his set up is by far the best sounding exaust set up I have ever heard on an LS1. I would be interested in seeing some flow numbers on those single chamber flowmasters, as well as a comparison on a complete X-pipe set up between the flowmasters and a typical borla or dynomax bullit set up.
Anyway, Congrats once again on your set up CB. It sounds deep and wicked.
LATER
Thanks for the link jrp. Im going to try that!
Rev.. Thanks bud People lose HP with the 80 series crossflow Fbody mufflers. The cross flows are complete crap if youve ever seen a crosssection of one. As far as HP, I dunno about comparing them to a Borla X1 or a bullet as both of them are straight through with 0 restricition, but you may never know. Im sure all the research that Flowmaster does with airflow with their baffles and plates and whatnot arent there to make someone lose power, but if they lose a couple HP, then so be it, The sound makes it worth its weight in gold!
Rev.. Thanks bud
People lose HP with the 80 series crossflow Fbody mufflers. The cross flows are complete crap if youve ever seen a crosssection of one. As far as HP, I dunno about comparing them to a Borla X1 or a bullet as both of them are straight through with 0 restricition, but you may never know. Im sure all the research that Flowmaster does with airflow with their baffles and plates and whatnot arent there to make someone lose power, but if they lose a couple HP, then so be it, The sound makes it worth its weight in gold! i ordered some pacesetters and i have a flow, i have no idea what one it is but after i get it all done ill post a link for the sound clip if anyone wants to hear it...
TECH Enthusiast
Joined: Jun 2003
Posts: 720
Likes: 0
From: So Cal
Originally Posted by Country Boy
Thanks for the link jrp. Im going to try that!
Rev.. Thanks bud People lose HP with the 80 series crossflow Fbody mufflers. The cross flows are complete crap if youve ever seen a crosssection of one. As far as HP, I dunno about comparing them to a Borla X1 or a bullet as both of them are straight through with 0 restricition, but you may never know. Im sure all the research that Flowmaster does with airflow with their baffles and plates and whatnot arent there to make someone lose power, but if they lose a couple HP, then so be it, The sound makes it worth its weight in gold!
Rev.. Thanks bud
People lose HP with the 80 series crossflow Fbody mufflers. The cross flows are complete crap if youve ever seen a crosssection of one. As far as HP, I dunno about comparing them to a Borla X1 or a bullet as both of them are straight through with 0 restricition, but you may never know. Im sure all the research that Flowmaster does with airflow with their baffles and plates and whatnot arent there to make someone lose power, but if they lose a couple HP, then so be it, The sound makes it worth its weight in gold! Tru DAt...the price for that set up isnt bad either.
Too bad im leaning toward a turbo set up now lol 
Might have to buy another LS1 and go procharger so i can run kooks with your dual set up.
Originally Posted by Country Boy
Thanks for the link jrp. Im going to try that!
Rev.. Thanks bud People lose HP with the 80 series crossflow Fbody mufflers. The cross flows are complete crap if youve ever seen a crosssection of one. As far as HP, I dunno about comparing them to a Borla X1 or a bullet as both of them are straight through with 0 restricition, but you may never know. Im sure all the research that Flowmaster does with airflow with their baffles and plates and whatnot arent there to make someone lose power, but if they lose a couple HP, then so be it, The sound makes it worth its weight in gold!
Rev.. Thanks bud
People lose HP with the 80 series crossflow Fbody mufflers. The cross flows are complete crap if youve ever seen a crosssection of one. As far as HP, I dunno about comparing them to a Borla X1 or a bullet as both of them are straight through with 0 restricition, but you may never know. Im sure all the research that Flowmaster does with airflow with their baffles and plates and whatnot arent there to make someone lose power, but if they lose a couple HP, then so be it, The sound makes it worth its weight in gold! Any way you could send me a copy of the sound file?
If so, please send it to: timsova@triton.net and I'll get it hosted on my website.
Thanks
Tim
Has anyone hosted this yet?
If not, Could you please send me a copy Country Boy?
kburke10@ameritech.net
I am about to put on a set of Dynatech long tubes and I am trying to decide on the rest of my dual exhaust setup.
If not, Could you please send me a copy Country Boy?
kburke10@ameritech.net
I am about to put on a set of Dynatech long tubes and I am trying to decide on the rest of my dual exhaust setup.