Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Vats issue please help

Thread Tools
 
Search this Thread
 
Old Aug 4, 2009 | 05:03 PM
  #1  
bloo4.6's Avatar
Thread Starter
Teching In
iTrader: (8)
 
Joined: Dec 2008
Posts: 38
Likes: 0
From: Roanoke tx
Default Vats issue please help

ok i just got my car fixed i had a vats problem now my buddies t/a is having the same problem, but when i tried to test the resistor in the key and it doesn't do anything and he doesnt have a spare anyone got any ideas
Reply
Old Aug 4, 2009 | 05:21 PM
  #2  
01ssreda4's Avatar
TECH Senior Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (96)
 
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Default

get someone to tune it out
Reply
Old Aug 9, 2009 | 09:25 AM
  #3  
Notmyvette's Avatar
Launching!
iTrader: (1)
 
Joined: Mar 2009
Posts: 259
Likes: 0
Default

I would assume it's the same on a 98 vette, if so put the key in and check the resistance of the 2 white wires going to the ignition switch....should be the same ohms as when you just test the resistor key itself....if you cant get a ohm reading on the resistor (both sides are clean right?) then I would have to say the resistors shot but Ive never heard any go bad. thats as far as ive gotten into that stuff....I assume when you said you tested it you mean with an ohmeter?
Reply




All times are GMT -5. The time now is 08:31 AM.