Need help diagnosing a problem
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Lincoln, NE
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Need help diagnosing a problem
Hey i got a 2000 trans am, mods in sig. So a couple weeks ago i was driving around, went to get on it and it got up to about 4 grand then started cutting out like it was running out of fuel, so i slowed down and whenever i gave it gas it wanted to die, i had oil pressure still wasnt overheating or nothing like that, so i limped it back home about 2 miles an hour is all the faster it would let me go. Then i go back the next day start it up and it idles alright but once i go to give it gas it tries to die. Then today which is about two weeks later i went and started it, tried to die at first when i reved it up and then after about 3 min i could give it gas and it would wait about a second and then rev up fine but it has about a second delay each time i hit the throttle. Any idea wat this could be? Thanks for the help.
#6
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Lincoln, NE
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
alright went back and started it checked the fuel pressure it was dead on ran fine and reved fine, went out and drove it and it drove just like normal no cutting out or anything. So i think im gonna change the fuel filter and clean the mass air flow and just see if it does it again, if it does prolly put my walbro in it finally. thanks for the help guys