Hooker headers

Reply Subscribe

Thread Tools

Search this Thread

Sep 10, 2009 | 03:38 AM

Phase-2

Thread Starter

Staging Lane

iTrader: (3)

Joined: Aug 2009

Posts: 66

Likes: 0

From: Allen,tx

Hooker headers

Anyone else had any problems with there hooker headers? Installed mine tonight and the o2 bungs are way off and i can't install the o2's. Guess tommrow ill have them drilled so i can put them in.

Sep 10, 2009 | 05:46 AM

alottaboost

Staging Lane

iTrader: (1)

Joined: Sep 2009

Posts: 53

Likes: 0

Way off as in a different location, or way off as in won't thread? A lot of A/M headers require o2 harness extensions.

Sep 10, 2009 | 08:10 AM

camaross00black

Staging Lane

Joined: Aug 2009

Posts: 62

Likes: 0

From: dallas area,texas

extension

you will have to use a extension or you can buy one already made up to just snap in you old wire then should not be a problem.

Sep 10, 2009 | 09:05 AM

TooLateVTEC

TECH Fanatic

iTrader: (2)

Joined: Apr 2009

Posts: 1,445

Likes: 2

From: FredVegas, Va

Mine threaded in fine.

I put them in before I put the headers in place...was easier that way for me.

Mine came with extensions to use and work fine so far!

Sep 10, 2009 | 10:21 AM

Frost

FormerVendor

iTrader: (45)

Joined: Jul 2005

Posts: 5,913

Likes: 2

From: Richmond VA

Quote:

Originally Posted by Phase-2

Anyone else had any problems with there hooker headers? Installed mine tonight and the o2 bungs are way off and i can't install the o2's. Guess tommrow ill have them drilled so i can put them in.

DON'T DRILL YOUR HEADERS!!

Buy extensions at a minimum. While you have them out though, if you have more than about 20K miles on those O2s, replace them with some that are long enough to not need extensions. What you need is the Bosch 13111; 2 of them.

Sep 10, 2009 | 12:40 PM

Phase-2

Thread Starter

Staging Lane

iTrader: (3)

Joined: Aug 2009

Posts: 66

Likes: 0

From: Allen,tx

lol no.... i have the extensions and everything.... as in the they drilled a hole for the o2 and welded the nut a little bit off from the whole so its not centered at all allowing the sensor to go in.

Reply Subscribe