Slp ls6 intake?
Thread Starter
10 Second Fun Car
iTrader: (7)
Joined: Nov 2002
Posts: 2,045
Likes: 1
From: Pearland, Tx
Slp ls6 intake? I have a 2000z28 and was wondering how bad is the SLPls6 intake with egr to put on? How much is involved and has anyone had any problems with it?
Feedback is greatly appreciated!
Feedback is greatly appreciated!
TECH Fanatic
Joined: Aug 2003
Posts: 1,768
Likes: 0
From: Lexington, NC
Its a pretty straightforward install, not difficult if you will take your time. I think you will have to take the fuel rails off and switch out the injectors to the new manifold. Either 4 or 8 bolts? Should be a fun saturday project. Expect to see 10RWHP or so from the intake. God Luck
Wes
Wes
TECH Fanatic
Joined: Aug 2003
Posts: 1,768
Likes: 0
From: Lexington, NC
I bought an LS6 intake. Swapped it with ARE for one of their LS6 intakes with EGR fitting in stock location. Install was straight forward using jmx's website. His install doc is great and easy to follow. Be carefully of vacuum line going from Brake Booster to back of intake. I disconnected mine from Brake Booster and this helped in preventing me from snapping Oil Sending Unit which is back there.
Good luck with the install.
-Tom
Good luck with the install.
-Tom
A person that has done a few can take care of this in about an hour while others can have it done in a few hours. Installation instructions can be found at - http://www.slponline.com/inst/30041.pdf
Tom
Tom
