Installing FAST 78mm
Thread Starter
Teching In
Joined: Jan 2010
Posts: 27
Likes: 0
Installing FAST 78mm I just picked up a FAST 78mm intake manifold with egr for my 240sx. My buddy and I were going to throw it on his 2000 ws6 untill summer, I just had a few questions.
Will his stock throttle body bolt up to the FAST intake?
Anything special we need to do with the coolant lines?
Will it show any gains untuned? Car has 228r cam and longtube headers.
Thanks
Will his stock throttle body bolt up to the FAST intake?
Anything special we need to do with the coolant lines?
Will it show any gains untuned? Car has 228r cam and longtube headers.
Thanks
as stated....new coolant lines will be needed.
if he's going from an ls1 intake you should see NICE gains. its very possible you'll need a tune. mine was lean after the FAST...lean enough we cut the dyno run short
if he's going from an ls1 intake you should see NICE gains. its very possible you'll need a tune. mine was lean after the FAST...lean enough we cut the dyno run short
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
