Ls1 block to bellhousing cover
Thread Starter
Teching In
Joined: Oct 2009
Posts: 24
Likes: 0
From: Houston TX
Ls1 block to bellhousing cover Please excuse mebif this is not posted in the appropriate area. I felt as though this belonged here because it has to do with an external part of the ls1 engine moreso than it does any transmission based topic.
With that being said, I am looking for the correct terminology for the cover on the left aide of an ls1 engine that fills the void between the block and the bellhousing of the transmission.
I have a huge void on the left side (mirror to where the starter is) that opens up road debri, squirrels and worst of all water to my flywheel and clutch assembly.
After searching for a few hours I have come up with nothing. If I can't find anything I will resort to fbricating my own cover.
Thanks.
With that being said, I am looking for the correct terminology for the cover on the left aide of an ls1 engine that fills the void between the block and the bellhousing of the transmission.
I have a huge void on the left side (mirror to where the starter is) that opens up road debri, squirrels and worst of all water to my flywheel and clutch assembly.
After searching for a few hours I have come up with nothing. If I can't find anything I will resort to fbricating my own cover.
Thanks.
