11 seconds

Reply Subscribe

Thread Tools

Search this Thread

Feb 27, 2010 | 02:23 AM

KUNAGUERO66

Thread Starter

Registered User

Joined: Feb 2010

Posts: 1

Likes: 0

11 seconds

whats the least expensive way to get into the 11's? without using nitrous or drag tires, only bolt ons. will an exhaust, headers, tb, ls6 intake, and cold air intake get me there?

Feb 27, 2010 | 02:29 AM

homerunhtr21

TECH Fanatic

iTrader: (18)

Joined: Jan 2007

Posts: 1,286

Likes: 1

From: Alabama

No chance...You will have to use drag radials...Actually if your an A4 you will need at least full bolt-ons, stall, and drag radials. Some have hit high 11's with that some need a cam. M6 are basically the same minus the stall...You almost always need a cam to hit 11's... But with no spray and no tires = no chance.

Feb 27, 2010 | 02:34 AM

twpetry

12 Second Club

iTrader: (1)

Joined: Feb 2008

Posts: 183

Likes: 0

From: Fredericksburg, VA

Quote:

Originally Posted by KUNAGUERO66

whats the least expensive way to get into the 11's? without using nitrous or drag tires, only bolt ons. will an exhaust, headers, tb, ls6 intake, and cold air intake get me there?

Well at least he didn't ask how to get into the 11's with a Honda....

Feb 27, 2010 | 02:35 AM

slowec

TECH Addict

iTrader: (9)

Joined: Jun 2004

Posts: 2,939

Likes: 0

From: Brunswick, Ga

NO, I run 12.00 with mods in sig. It'll take a factory freak, 50 mph tailwind, and a hell of a driver to pull that off. but, this is the internet, so I am sure 5 people will post behind me saying its easily doable... Good luck.

Feb 27, 2010 | 02:59 AM

twpetry

12 Second Club

iTrader: (1)

Joined: Feb 2008

Posts: 183

Likes: 0

From: Fredericksburg, VA

^^ no LS6 Intake??

Feb 27, 2010 | 06:26 AM

00MaroonZ28

11 Second Club

iTrader: (3)

Joined: Sep 2007

Posts: 792

Likes: 0

From: Brooklyn Center, MN

Quote:

Originally Posted by KUNAGUERO66

whats the least expensive way to get into the 11's? without using nitrous or drag tires, only bolt ons. will an exhaust, headers, tb, ls6 intake, and cold air intake get me there?

Possibly, if you gut the **** out of the car. I'm talking 3200 lbs with driver.

Just do the cam, it's not that big of a deal since you're willing to do the rest of the bolt-ons.

Feb 27, 2010 | 07:19 AM

Justins00ss

11 Second Club

iTrader: (18)

Joined: Mar 2007

Posts: 845

Likes: 9

From: Eastern Ma/ PSL florida

Well my buddie Joe on this site has a 01 SS A4. Yank stall, headers, ORY, factory CME catback, LS6 intake, Ported TB, lid, some suspension work, and slicks and skinnies. Stock 10 bolt with 3.23 gears and he has gone 11.89. But the track down here is nearly at sea level. That and it was a 50 degree night out.