Comp cams rocker trunion upgrade kit...
Thread Starter
Joined: Apr 2008
Posts: 1,616
Likes: 4
From: Fort Worth Texas
Comp cams rocker trunion upgrade kit... Well I just finished my upgrade on my rockers I got the comp kit in and installed. To everyone out here who is considering it I just wanted to state that this is a very easy install. I have less than an hour in it, including cleaning the rockers. Knocking the originals out was very simple, and installing the new ones also very easy. I actually made the little plates they ask for in the directions but You really dont have to have them. You could use sockets of the correct size just take your time. I used an arbor press at work to do mine, so simple, but if you dont have access to one you could use a vise. Do not hammer them in they are small bearings and you would damage them.. I just wanted to post this so anyone who was considering it would know that it is not that big of a deal if you are even slightly mechanical you will have no problems..
If you are purchasing one of these to do yourself, the first person to PM me I will give you the plates I made to do the swap that comp recommends. All I ask is that when you are done return the favor to another member.
If you are purchasing one of these to do yourself, the first person to PM me I will give you the plates I made to do the swap that comp recommends. All I ask is that when you are done return the favor to another member.
