01zb4c

iTrader: (7)

Ok need help asap! the car is in the way... car ran just fine we put headers and a ls6 intake on it and now we go to start it and it wont idel... unplug the maf and it will run just fine, just idels down slow... we put a different maf on same problem... i dot know what else it could be. the codes on it are all dealing with the maf... Thanks

eseibel67

iTrader: (10)

Check your ENG SEN fuse.

RARON455

iTrader: (35)

could also be a vaccuum leak, make sure that you have two hoses connected at the back of the manifold, a large one and a small one.

udienow

iTrader: (18)

Double check all the connectors/hoses... you probably didnt plug something in.

01zb4c

iTrader: (7)

the small hose in the back is pluged in and the big one is the one that goes to the brake booster right? the sensor in the back of the intake is pluged in... what else should i look for? its not a fuse cuz the car run and starts just dies when u plug in the maf...

02TribalsWS6

iTrader: (4)

check your O2's, are they plugged in? and are you not using rear O2's and possibly plugged your fronts into the Rear's?

BadA** SS

iTrader: (3)

02 sensors are in and plugged in right

eseibel67

iTrader: (10)

I'm not saying this is your problem, but the car will still run (like ****) with the ENG SEN fuse burnt. It supplies 12v to the MAF and the O2 heaters.

BadA** SS

iTrader: (3)

car is fixed now...our auto mechanics instructor put his hand over the tb and let it bogg down...let go.. put the maf back on and plugged it in and it worked so we dont know what happend...thanks for the advise though guys

434strokergt45r

iTrader: (-1)

go over everything you unhooked backtrack you will get it

KevinR

Ummm....You're a little late on this one, my friend.