Lid Question
Thread Starter
Joined: Dec 2001
Posts: 4,909
Likes: 3
From: Cleveland, OH
Lid Question I had FTRA for a couple of years, took it out recently.
So, the hole in the lower air box is still there, but now that I pulled FTRA, should I:
Leave the opening in front of the airbox open, relying on the hole from underneath and the front for air?
Or block the front, soley relying on the hole underneath for air?
I don't want to buy a new radiator shroud and lower air box, figure I'll leave it alone.
Thanks.
So, the hole in the lower air box is still there, but now that I pulled FTRA, should I:
Leave the opening in front of the airbox open, relying on the hole from underneath and the front for air?
Or block the front, soley relying on the hole underneath for air?
I don't want to buy a new radiator shroud and lower air box, figure I'll leave it alone.
Thanks.
Thread Starter
Joined: Dec 2001
Posts: 4,909
Likes: 3
From: Cleveland, OH
Blocked the radiator too much, sucked up too much paper / leaves etc. that get stuck between the FTRA and the radiator itself. I'm thinking the same, leave both holes open as it's more or less the FRA mod at this point.
