Large debris on the MAF screen.
Thread Starter
TECH Enthusiast
Joined: Dec 2003
Posts: 567
Likes: 0
Large debris on the MAF screen. I kept finding large (relatively speaking) chunks of debris and rubber on my MAF screen when I would check the air filter. I replaced my airbox, and when I pulled it off this is what I found. The rubber was from a small gasket that is on the inside of the stock airlid neck. The gasket had hardened and been coming off, bit by bit. Of course the HUGE CRACK was also letting in the pine needles and blades of grass I was finding on the MAF screen.
The airbox had 48k on it. Thanks to JRP for hooking me up on the air intake layout when I was a super newbie so I could understand it
I don't think I'll ever run without an MAF screen.
The airbox had 48k on it. Thanks to JRP for hooking me up on the air intake layout when I was a super newbie so I could understand it
I don't think I'll ever run without an MAF screen.
Same exact thing happened to my car. I found it when I was replacing the stock box with a lid. The car only had 1,500 miles on it at the time, with all the junk on my MAF screen it was apparent that the car came from the factory like that. 
i run without a maf screen, just have to make sure its all sealed right. mine did the same thing stock but once i replaced everything....filter, lid.....it was fine, never saw anythign again on the screen so i got ported ends. what kinda lid u have now? stock?
Thread Starter
TECH Enthusiast
Joined: Dec 2003
Posts: 567
Likes: 0
Originally Posted by WS6FirebirdTA00
i run without a maf screen, just have to make sure its all sealed right. mine did the same thing stock but once i replaced everything....filter, lid.....it was fine, never saw anythign again on the screen so i got ported ends. what kinda lid u have now? stock?
Ya, I put another stock one on it. I got it from a junkyard and it cleaned up really well, cost me $20.00. GM wanted $85.00 for a new one. I am wanting a clear aftermarket one, I am just waiting to see one for sale in the "for sale" section of this site (there have been a couple, but I have not seen them in time and they were sold). The 50% savings of buying one used is just too much for me to pass up.
i hear ya. but once u get it sealed nice...like filter and lid fit all tight and snug u can take the screen out without a problem. yeah i couldnt believe that thing was messed up on mine...that was my excuse why i HAD to get a new one lol my parents said u jsut got the damn car lol but then i showed my dad this and he agreed so wala and i love it 
lol
so anyone else out there with a stock lid u might wanna check on it, thanks for posting pics thats a good idea for newbies
lolso anyone else out there with a stock lid u might wanna check on it, thanks for posting pics thats a good idea for newbies
