Hooker
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Feb 2004
Posts: 1,112
Likes: 1
From: rosemount,mn/windsor locks,ct
Hooker I am looking at getting either a set of kooks 1&3/4 or Hooker Stainless 1&3/4 headers. I Know that the hookers are about $300 cheaper,how is the quality/fitment? Anyone else have experience with the hooker stainless headers??
TIA
TIA
Teching In
Joined: Jul 2009
Posts: 48
Likes: 0
From: Bates City, MO
I have the hookers on my car and they fit great. They do just barely touch on the driver side subframe. I just cut off a small 1/8th inch sliver from the subframe and it's fine now.
I also have the ORY from hooker and it SUCKS. The factory seam in the pipe was split and I had to weld it in several places also where the two 3" pipes meet and are welded together; the hole between the two on the inside was only about 1.5"
Here is a link to all the pics
http://s212.photobucket.com/albums/c...%20Trans%20Am/
I also have the ORY from hooker and it SUCKS. The factory seam in the pipe was split and I had to weld it in several places also where the two 3" pipes meet and are welded together; the hole between the two on the inside was only about 1.5"
Here is a link to all the pics
http://s212.photobucket.com/albums/c...%20Trans%20Am/
