Will I break....?!
Will I break....?! Near stock auto 01 TA w/ 117k miles. Stock drive shaft. Changes gears from 273 to 373 and got a set of bfg drag radials. Question is my u-joints gonna be okay with these mods?
Theres a chance you can break stuff like that even being stock. I twisted the driveshaft and tore off the rear end in my all stock 99 z28. From a dead stop I put the hammer down,broke stuff,and it sent the car flying sideways into a poll. Crazy ****.
But in MOST cases you should be fine. I have coming up on 88k on the ss and iv made about 30-35 passes at the track with drs. Knock on wood no problems yet. Im going up again tomoro night so I hope I didnt just jinx myself.
But in MOST cases you should be fine. I have coming up on 88k on the ss and iv made about 30-35 passes at the track with drs. Knock on wood no problems yet. Im going up again tomoro night so I hope I didnt just jinx myself.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
