02 Air removal
Thread Starter
On The Tree
Joined: Jan 2009
Posts: 115
Likes: 0
From: NC
02 Air removal I see alot of things about the egr and air removal on the 98's, is their a write up on the 02's or is it just pretty much the same thing as described here..
http://bowlingss.com/LS1_How_To.htm
just get some block off plates and go for it.. I saw it where this guy had all of his hoses gone like the ones running from the valve covers and ect.. or is that when you do a catch can??
http://bowlingss.com/LS1_How_To.htm
just get some block off plates and go for it.. I saw it where this guy had all of his hoses gone like the ones running from the valve covers and ect.. or is that when you do a catch can??
Same exact thing, minus the doohickie that's bolted to the back of the drivers side valve cover. You'll need to unbolt it with a 15mm wrench but loosening a bolt on the back of the head. It's a tight squeeze but fairly easy to get to. A gear wrench makes life easier here but not required.
Other than that, it's the exact same.
Other than that, it's the exact same.
