ABS Problem

Reply Subscribe

Thread Tools

Search this Thread

Jan 25, 2011 | 04:37 PM

Whiteaw57

Thread Starter

TECH Resident

iTrader: (2)

Joined: Sep 2010

Posts: 909

Likes: 0

From: Salisbury, NC

ABS Problem

Hope this is the right place, if not let me know. I have a 98 z28 that after having an oil pan replaced the abs system is going crazy. Anytime you touch the brakes the LOW TRAC light illuminates and the abs system is kicking back on the pedal. Even slow 5 mph rolls. After about 2 minutes of this it senses something is wrong and the ABS INOP, along with ASR OFF light comes on. Firestones screwing me and saying since the car wasnt driveable when i brought it in they cant confirm a mistake on their part. Any tips would be helpful.

Is there a reset or relearn period for these systems?

Jan 25, 2011 | 07:27 PM

OUTLAWZ RACING

TECH Addict

iTrader: (9)

Joined: Mar 2004

Posts: 2,726

Likes: 1

From: COLUMBUS GA.

was the car in the air ? sounds like sombody tried to do a burn out with the tcs on that would wreek havoc on the system. unplug it and reset the computer.