will a fast 90 fit on a ported weiand intake

Reply Subscribe

Thread Tools

Search this Thread

Jan 31, 2011 | 12:45 PM

transam8410

Thread Starter

Staging Lane

iTrader: (1)

Joined: Jan 2010

Posts: 55

Likes: 0

will a fast 90 fit on a ported weiand intake

I bought a 90mm fast tb which i got a good deal on, and now theres a good deal on a weiand intake which I will have ported to fit the 90.
My question is will the fast 90 bolt patern fit on the the weiand bolt patern because I know that the 90 doesnt fit the stock bolt patern...I just didnt know if the weiand bolt patern is the same as the stock bolt patern.

Anyone have any experience with this combo, sorry if theres already a thread on this, i tried the search with no luck

Jan 31, 2011 | 05:50 PM

garygnu

TECH Senior Member

Joined: Feb 2009

Posts: 5,445

Likes: 4

no it won't fit,the weiand intake is a 3 bolt design.look for a used fast,I see them go for $600.

Jan 31, 2011 | 06:55 PM

Unertl42

TECH Fanatic

iTrader: (63)

Joined: Sep 2007

Posts: 1,041

Likes: 0

From: IA

Quote:

Originally Posted by garygnu

no it won't fit,the weiand intake is a 3 bolt design.look for a used fast,I see them go for $600.

Exactly

Feb 1, 2011 | 03:10 AM

99Bluz28

TECH Senior Member

iTrader: (35)

Joined: Nov 2007

Posts: 9,705

Likes: 12

From: C. V., Kalifornia

Edelbrock makes a 90mm TB with a dual bolt pattern that will work.

Feb 2, 2011 | 08:08 PM

transam8410

Thread Starter

Staging Lane

iTrader: (1)

Joined: Jan 2010

Posts: 55

Likes: 0

thanks for the replies guys....but the fast tb that i have is a 3 bolt patern but its bigger than the stock paterns because when i got it i tried it on my stock 99 ls1 intake (not the ls6) and the patern was further apart if that makes sence

and the intake im lookin to buy is a polished unit for $250 and im going forced induction so if anything i would rather get a different tb and go with this intake, what do you guys think?

May 15, 2011 | 05:32 PM

fastsspr

TECH Fanatic

iTrader: (49)

Joined: Oct 2003

Posts: 1,313

Likes: 10

From: Las Vegas NV

You can tap 2 new holes to make the TB fit or find some spacer in ebay that let you use a 4 bolts TB into a 3 bolt intake. I used the weiand intake in the past and like it that is why i both another to my set up.

Reply Subscribe