LS1TECH - Camaro and Firebird Forum Discussion - p/v clearance issues with this EPS cam/AFR heads?

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)

- Generation III External Engine (https://ls1tech.com/forums/generation-iii-external-engine-6/)

- - p/v clearance issues with this EPS cam/AFR heads? (https://ls1tech.com/forums/generation-iii-external-engine/1445331-p-v-clearance-issues-eps-cam-afr-heads.html)

cals400ex

07-16-2011 09:11 AM

p/v clearance issues with this EPS cam/AFR heads?

I was looking at AFR 215 heads (65cc) for my current EPS blower cam. The cam specs are:

226/238 .605”/.615” 115LSA +3 advance

I have a stock bottom end LS1 and I would like to avoid flycutting. Would this be pushing my luck?

Geoff

07-16-2011 11:04 AM

If you could give me a valve drop measurement I could let you know for sure if it would fit. More than likely it will fit, but it would be better to measure rather than guess.

LS1-450

07-16-2011 02:59 PM

+1

The 226, .605" side will clear, it's the 238 duration w/ the .615" lift that's in question. Probably OK, but as stated above...

cals400ex

07-16-2011 03:03 PM

Quote:

Originally Posted by Geoff (Post 15158256)

If you could give me a valve drop measurement I could let you know for sure if it would fit. More than likely it will fit, but it would be better to measure rather than guess.

I am not exactly sure what a valve drop measurement means? Do you mean to check with clay? I don't even have the cam from you yet. It is a custom grind that you are still working on.

Sorry, I must have posted this in the wrong forum...

All times are GMT -5. The time now is 09:44 PM.