pcv delete help
Thread Starter
Teching In
Joined: Jul 2011
Posts: 23
Likes: 0
pcv delete help hi i recently bought a 98 formula so im new to f bodies. i was reading up on the pcv delete, i know to vent the fill cap but i am confused on what to cap off besides throttle body. if anyone has better pictures what to cap off and remove that would help me greatly. also what do i do with the driver side rear pcv ? thanks again
^ You don't delete the PCV. You'll just end up with leaking gaskets and lowered power. You can upgrade it so you won't ingest as much. These in stock form are notorious for drinking ~1qt of oil between changes, depending on your driving style.
You can run a breather on the filler cap, but that's been debated quite a bit. You can upgrade to a single or dual catch-can setup to catch oil before it's sucked into the intake... or you can upgrade to the LS6 valley AND a catch can to grab every ounce possible.
You can run a breather on the filler cap, but that's been debated quite a bit. You can upgrade to a single or dual catch-can setup to catch oil before it's sucked into the intake... or you can upgrade to the LS6 valley AND a catch can to grab every ounce possible.
For 12 bucks, you can do what LS1121 did. I personally think it's a band-aid to a gunshot wound, but what he did wasn't half assed. It's about as good as a stock replacement is going to get.
Still, when money permits, introduce yourself and make friends with:
GM Part # 12577927 - LS6 Valley cover, comes with bolts & gasket
GM Part # 12594779 - Hose
Still, when money permits, introduce yourself and make friends with:
GM Part # 12577927 - LS6 Valley cover, comes with bolts & gasket
GM Part # 12594779 - Hose
Trending Topics
For 12 bucks, you can do what LS1121 did. I personally think it's a band-aid to a gunshot wound, but what he did wasn't half assed. It's about as good as a stock replacement is going to get.
Still, when money permits, introduce yourself and make friends with:
GM Part # 12577927 - LS6 Valley cover, comes with bolts & gasket
GM Part # 12594779 - Hose
Still, when money permits, introduce yourself and make friends with:
GM Part # 12577927 - LS6 Valley cover, comes with bolts & gasket
GM Part # 12594779 - Hose
What he said.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Thread Starter
Teching In
Joined: Jul 2011
Posts: 23
Likes: 0
I read something on a newer designed Pcv valve suppose to help with the burning oil can I just replace my stock with that and leave all the hoses and stuff stock. Sorry for all the questions im just confused working on this car
