wicked383lt1

Is it true that a cut-out or cut-outs need to be placed a certain distance from the headers?

00SLPSS

iTrader: (15)

i'll let the super guru's answer it, but for a rough quick answer- I've read it has to do more with distance of o2 sensor to open end header, you want to have XXX distance away from those.

get a 2nd opinion before throwing them in, but I'd say a good 12-14" away from o2 sensor should get ya done, i figure thats no different than people running mufflers dumped right off the headers.

wicked383lt1

Are there any super guru's out there that can answer this question or gave pics?

blackbird0230

You have to call them the overlords, rub your belly clockwise while rotating your eyes counter clockwise 3 times to get an answer.

Shadow1999

Base rule of thumb is at least 12" away from the O2 so you don't foul it with exhaust reversion.

wicked383lt1

Thank you overlord super guru...lol

Shadow1999

Ummm, ok. If you do a search in more than this forum you will find a mass of information on this very subject. Google works wonders for me. Your welcome?