Help with y pipe
Help with y pipe I've had this d@mn thing adjusted by 2 different pros and myself. TSP ory with pacesetters and random tech catback. Won't seat correctly, now its tapping the bottom of the car....suggestions please....irritating as hell!
Get some poly motor mounts and see if that fixes it. This is a common problem and motor mounts usually fixes it. Some headers also bank on the K-member so make sure there is clearance from header to K-member (generally drivers side).
that^ mine does the same thing only under heavy throttle. but those engine mounts are a pita to swap! get new ones. can you post some pics? may be its hitting your drive shaft. id reinstall the whole thing again.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
might just need to do some die grinding on the k member if you have the clearance to do so,i installed poly mount on mine and they still hit on passenger side.
but that was an easy fix as well.
GL
Ed
but that was an easy fix as well.
GL
Ed