Header Help
Thread Starter
Teching In
Joined: Aug 2011
Posts: 4
Likes: 0
From: Tinley Park, IL
Header Help I have a 2001 z28 and im looking to buy a set of longtubes for my car. The only mods i have done to my car include Slp Cold air intake, Slp MAF sensor, and Hooker Cat-back exhaust. Should I get 1-3/4" or 1-7/8"? Should I get TSP or Hooker?
TECH Fanatic
Joined: Jun 2007
Posts: 1,062
Likes: 2
From: Westminster, MD
1-7/8" is what most people are going to say. You lose virtually nothing if anything on the low end and you'll gain up top over 1-3/4", plus 1-7/8" is better for future mods. TSP is stainless and a good price so I'd go for those. I would have done TSP myself but I opted for spending the extra $$ and got ARH because at the time TSP didn't have a stainless y-pipe, but now it is stainless
We have many customers happy with the quality and price of our 1 7/8" headers.
__________________
NOW OFFERING TSP BY YANK CONVERTERS
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
NEW NUMBER (512)863-0900
