Pharcyde50

iTrader: (11)

Hey Guys,

Do you need to use an LS6 valley pan for a Fast 102 or is the stock valley pan cool?

Does anyone have pics of it installed with the Vengeance Racing Fast Billet Rail kit?



Thanks

Scott

LilJayV10

iTrader: (39)

You do not have to use the LS6 valley cover. Just make sure you use the button head valley cover bolts.

Pharcyde50

iTrader: (11)

Thanks! Looks like I'm gonna delete the evap system to clean things up under the hood also.

Undertow74

iTrader: (45)

I would swap over to the LS6 valley if your lookng to clean things up under the hood, easy to do since you will have the intake off anyways. I would not delete the Evap system, but thats just me, not much is going to be gained, but be prepaired for the gas fumes inside your car. if you dont mind smelling fuel all day. Just my opinion

LilJayV10

iTrader: (39)

The LS6 valley is kind of a pain to do IMO. Has there been shown any real benefits over a good catch can setup?

Pharcyde50

iTrader: (11)

I've got a catch can already. I'll get some pics up once i get it on and the fuel system setup.

Undertow74

iTrader: (45)

Why is it a pain to put the LS6 valley cover on if you have the manifold off all you have to do is pull the knock sensors and then take the cover bolts off and pull the cover. If you dont have the LS6 block you only have to notch a small section of the block on the passenger side. i used a dremel and a screw driver and took less than 10 minutes. If you consider that a pain........i feel bad if you do any other mods on the car yourself then because it would be a nightmare