Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories

Sponsored by:

Catch can?

Reply Subscribe

Search this Thread

Old

May 27, 2013 | 09:46 PM

#1

Thread Starter

Staging Lane

iTrader: (1)

Joined: Jun 2011

Posts: 80

Likes: 0

From: TX

Default

Catch can?

Hey guys I know this has been covered a million times on here but I just finished installing my RX catch can on my engine and just wanted to double check to see if I got it right. I've read a ton of threads on this and routed the hoses the way it looks like everyone is doing for these set ups and capped the vent tube on the drivers side valve cover rear. Any advice is appreciated

Old

May 27, 2013 | 10:32 PM

#2

10 Second Club

Joined: Feb 2012

Posts: 1,261

Likes: 6

Default

Where does that lower hose run to? I want to install one.

Old

May 27, 2013 | 11:05 PM

#3

Thread Starter

Staging Lane

iTrader: (1)

Joined: Jun 2011

Posts: 80

Likes: 0

From: TX

Default

It's connected to the valley cover

Old

May 31, 2013 | 08:25 PM

#4

Thread Starter

Staging Lane

iTrader: (1)

Joined: Jun 2011

Posts: 80

Likes: 0

From: TX

Default

Anyone know if this is right?

Old

Jun 1, 2013 | 11:48 PM

#5

TECH Senior Member

iTrader: (35)

Joined: Nov 2007

Posts: 9,705

Likes: 12

From: C. V., Kalifornia

Default

No, it's not right.
You want the valley cover outlet going into the center CC port, and the side CC port going to the intake manifold port.

Old

Jun 2, 2013 | 09:40 AM

#6

Thread Starter

Staging Lane

iTrader: (1)

Joined: Jun 2011

Posts: 80

Likes: 0

From: TX

Default

Great! Thanks for the heads up!

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 04:42 AM.