How Much To Knotch The K Member
How Much To Knotch The K Member OK I DID MY header install but i need my k member knotched and i know i cant do this my self so im takeing it to A SHOP ON TUES TO GET IT KNOTCHED (JUST A BIT) how much should this cost (BALLPARK)
You can find a decent sawzall for about $80 and the blades are gonna cost you about $8.00. So I would say that for less than $100 you can have it notched and when you get done you'll have a nice sawzall.
Originally Posted by jamnut
You can find a decent sawzall for about $80 and the blades are gonna cost you about $8.00. So I would say that for less than $100 you can have it notched and when you get done you'll have a nice sawzall.
Originally Posted by ta12sec
I just knoched mine with a die grinder find some one local who has air and a grinder and have at ls1 tech members always help out
Yup, thats what my buddy and I did too for mine. Sparks flin' everywhere. It was fun. I actually trie my sazall but couldn't get the blade to fit and trim the lip properly because of the overlapping bulges. 
