Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

need help with front accessories

Thread Tools
 
Search this Thread
 
Old Apr 26, 2014 | 08:07 AM
  #1  
erskine's Avatar
Thread Starter
On The Tree
iTrader: (5)
 
Joined: Oct 2006
Posts: 197
Likes: 0
From: burbs of detroit
Default need help with front accessories

i bought a ls2 vette engine and putting it in a f-body. the alternator bracket hits the abs block i think thats what it is? so is there a bracket for vette acc that mounts at the bottom. plus i got a street electric water pump, no power steering.

or should i sell the vette stuff and switch to an fbody brackets?
Reply
Old Apr 28, 2014 | 03:09 PM
  #2  
skiziFiziks's Avatar
Staging Lane
iTrader: (3)
 
Joined: Feb 2014
Posts: 52
Likes: 0
From: Raleigh NC
Default

Originally Posted by erskine
i bought a ls2 vette engine and putting it in a f-body. the alternator bracket hits the abs block i think thats what it is? so is there a bracket for vette acc that mounts at the bottom. plus i got a street electric water pump, no power steering.

or should i sell the vette stuff and switch to an fbody brackets?
Did you start with an F-Body without a powertrain? I ask because if you had the previous LS powertrain you could simply transfer all the old accessory drive straight over.

Holley has new brackets that could help you relocate what you need to and possibly use the existing components. Check them out here.

http://www.holley.com/AppTypes/LS%20...y%20Drives.asp
Reply




All times are GMT -5. The time now is 06:01 AM.