LS6 pcv system I'm switching my pcv system on my 347 iron block build to an LS6 style. I've already acquired the LS6 valley cover, my question is how do I go about plugging the existing pcv tubes in my valve covers, do I need to block both off? And do I use the GM# 12568011? |
You need the hose in post 6 if you don't plan on using a catch can https://ls1tech.com/forums/generatio...-pcv-help.html Yea that cap will work for the rear passenger vacume port You will use a rubber vacume cap for the driver side |
Originally Posted by 2001AntiVenom
(Post 18657830)
You need the hose in post 6 if you don't plan on using a catch can https://ls1tech.com/forums/generatio...-pcv-help.html Yea that cap will work for the rear passenger vacume port You will use a rubber vacume cap for the driver side |
All times are GMT -5. The time now is 02:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands