LS6 pcv system
Thread Starter
Staging Lane
Joined: Jan 2014
Posts: 55
Likes: 0
LS6 pcv system I'm switching my pcv system on my 347 iron block build to an LS6 style. I've already acquired the LS6 valley cover, my question is how do I go about plugging the existing pcv tubes in my valve covers, do I need to block both off? And do I use the GM# 12568011?
You need the hose in post 6 if you don't plan on using a catch can
https://ls1tech.com/forums/generatio...-pcv-help.html
Yea that cap will work for the rear passenger vacume port
You will use a rubber vacume cap for the driver side
https://ls1tech.com/forums/generatio...-pcv-help.html
Yea that cap will work for the rear passenger vacume port
You will use a rubber vacume cap for the driver side
Thread Starter
Staging Lane
Joined: Jan 2014
Posts: 55
Likes: 0
You need the hose in post 6 if you don't plan on using a catch can
https://ls1tech.com/forums/generatio...-pcv-help.html
Yea that cap will work for the rear passenger vacume port
You will use a rubber vacume cap for the driver side
https://ls1tech.com/forums/generatio...-pcv-help.html
Yea that cap will work for the rear passenger vacume port
You will use a rubber vacume cap for the driver side
