The Wonder Can
Thread Starter
Staging Lane
Joined: Mar 2004
Posts: 79
Likes: 0
The Wonder Can Just had H/C, TB, and Intake installed a couple weeks ago. Wanted to make sure the intake tract stayed clean and dry so I got an AMW Catch Can and Al's bracket to mount it.
Just checked it for the first time last night after about 500 miles. That thing just flat out does a great job!!
.There was a bunch of oil in the bottom.
It's a pleasure to put a nice looking piece under the hood AND have it perform.
Now, for you guys who don't have a catch can..... how could you not??
Congrats to AMW on a fine product
That is all...
Just checked it for the first time last night after about 500 miles. That thing just flat out does a great job!!
.There was a bunch of oil in the bottom.It's a pleasure to put a nice looking piece under the hood AND have it perform.
Now, for you guys who don't have a catch can..... how could you not??
Congrats to AMW on a fine product
That is all...
TECH Fanatic
Joined: Nov 2003
Posts: 1,241
Likes: 0
From: MD
[QUOTE=Fastt Gunn]
Now, for you guys who don't have a catch can..... how could you not??
QUOTE]
I don't use any oil. (shrug) I did a small verticle mod and I haven't had an issue. Oil pressure is fine and oil level stays the same.
Now, for you guys who don't have a catch can..... how could you not??
QUOTE]
I don't use any oil. (shrug) I did a small verticle mod and I haven't had an issue. Oil pressure is fine and oil level stays the same.
Thread Starter
Staging Lane
Joined: Mar 2004
Posts: 79
Likes: 0
[QUOTE=Dal1as] Yeah, forgot about you lucky ones who don't suck oil! I'm in the "other" group. Or should I say groups.... Mine sucks oil through the PCV and consumes oil (burns?)....
The vertical mod, the seperator mod, the breather mod..... Some of that seemed to work for some but not all. At least from what I could read about. The PCV issue has been floating around for a long time. I couldnt decide which was best for me so I didnt do anything. But after hearing the success stories with the AMW can, I knew it was the way to go. I'm happy
Originally Posted by Fastt Gunn
Now, for you guys who don't have a catch can..... how could you not??
QUOTE]
I don't use any oil. (shrug) I did a small verticle mod and I haven't had an issue. Oil pressure is fine and oil level stays the same.
QUOTE]
I don't use any oil. (shrug) I did a small verticle mod and I haven't had an issue. Oil pressure is fine and oil level stays the same.
The vertical mod, the seperator mod, the breather mod..... Some of that seemed to work for some but not all. At least from what I could read about. The PCV issue has been floating around for a long time. I couldnt decide which was best for me so I didnt do anything. But after hearing the success stories with the AMW can, I knew it was the way to go. I'm happy
Trending Topics
Originally Posted by technical
I only have 2500 miles on the car. I hasn't started sucking oil yet.
I'll make a small wager that you find oil in the intake. LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
TECH Addict
Joined: Mar 2004
Posts: 2,336
Likes: 0
From: Fat Chance Hotel
Originally Posted by WILWAXU
pull your TB off I'll make a small wager that you find oil in the intake.
I'll make a small wager that you find oil in the intake. 
I know that mine sucks oil, when I did my TB bypass about a month ago, I looked inside the intake thru the throttle body, looked like a mobil 1 pond. My can is shipping today, can't wait to get it on and stop that nonsense. Now, what's everyone doing to clean that outta the intake after the can's on, or will it eventually just get sucked clean and be the end of it?
Originally Posted by technical
Normally I'd take your money from you, but you couldn't possibly have known that I had the engine apart last week and saw no oil in the intake, on the TB, in the intake ports, or in the CC. So if you still want to wager, how about $2200. That should cover the cost of a new 12 bolt.
TECH Addict
Joined: Mar 2004
Posts: 2,336
Likes: 0
From: Fat Chance Hotel
Originally Posted by WILWAXU
Congratulations on owning the ONLY LS1 ever made that doesn't suck oil... I don't believe it.. but we're all entitled to our own opinions.
It's not an opinion. I didn't see any oil there.
I imagine at some point it will start to drink oil, it just hasn't started yet.
I went looking through my pictures, but I don't have any closups of the intake or TB.
I do have one of the engine, you can see how clean it is...
