Nice true dual setup using short torque arm
Nice true dual setup using short torque arm 
True dual running underneath the mwc cat back cross member (great clearance) WITH dual cutouts on it. I've reached out to MWC for more details on this car. I know short torque arms and true duals are a concern for some but this setup is very interesting. Looks like a dual/dual magnaflow in the back.
Not sure if those pipes are 2.5" or 3.0", but I'm mainly interested in more photos showing clearance, especially with the cutouts up front there as it's hard enough to get a 3" pipe coming off the headers to have good clearance, let alone a cutout.
But to get back to your original point, putting true duals into a dual/dual muffler kind of defeats the purpose of having true duals.
TECH Senior Member
Joined: Jun 2016
Posts: 22,293
Likes: 3,617
From: Central Cal.
Not really, it's going thru an X-pipe, so whether or not the two tailpipes go thru one or two mufflers it would still have the benefit of two full pipes carrying it out. It would not have the sound of an individual bank per pipe with the X-pipe.
