Low volts to injectors
Low volts to injectors When I turn the key to the start position my injectors only receive 1.5 volts and I can't seem to figure out why. At the fuse it gets 12.7. But at the injector its only 1.5. Why is this?
Last edited by Philhippy45; Oct 2, 2018 at 05:51 PM.
it doesn't do anything on start besides crank. And why would I be getting only 1.5 on run? Fuel pump and iac have power. Also coil packs arnt working either. I measured it at the fuse box the one pink wire has 12v going to it on run but when you trace it it goes to the starter relay. The other pink wire that in the ing relay goes to The injector fuses but only has 1.5v. When I turn to start both pink wires receive 12v. So it seems that something will not let the other side of the relay to give the injectors 12v on run. But I tried new relays and nothing. Wtf is going on? There is also a black wire in there that has 12v as well seems to be all the time what is that for?
Last edited by Philhippy45; Oct 2, 2018 at 08:18 PM.
